Design of an Inclined Conveyor Drive Motor with A Capacity of 500 Kg/Minute at CV Dwitura
DOI:
https://doi.org/10.59525/gej.v3i1.950Keywords:
Conveyor, Electric Motor, Force, Load CapacityAbstract
In an era of increasingly fierce industrial competition, speed and efficiency in the production process are important factors. Conveyors are one solution for moving goods continuously and efficiently. The purpose of this study discusses the design of an inclined conveyor drive motor with a capacity of 500 kg/minute at CV Dwitura. This research method uses a descriptive qualitative approach. Calculations include analysis of force, torque, and carrying capacity, as well as the selection of a 2.2 kW electric motor and an appropriate gearbox. The results of the study indicate that the design is able to meet the specified capacity requirements. The design of an inclined conveyor drive motor with a capacity of 500 kg/minute has been successfully realized by selecting a 2.2 kW motor and a 40-ratio gearbox. The calculation results show that the actual capacity exceeds the target, so the system is declared effective and feasible to use..
References
Alharbi, F., Luo, S., Zhang, H., Shaukat, K., Yang, G., Wheeler, C. A., & Chen, Z. (2023). A brief review of acoustic and vibration signal-based fault detection for belt conveyor idlers using machine learning models. Sensors, 23(4), 1902.
Bajda, M., & Hardygóra, M. (2021). Analysis of the Influence of the Type of Belt on the Energy Consumption of Transport Processes in a Belt Conveyor. Energies, 14(19), 6180.
Brahma, A., & Wynn, D. C. (2020). Margin value method for engineering design improvement. Research in Engineering Design, 31(3), 353-381.
Dhandapani, V., & Balasubramanian, G. (2025). Optimizing switching sequences in AC-AC converters for enhanced safety and performance in conveyor systems. Scientific Reports, 15(1), 30786.
Ghodki, M. K., Swarup, A., & Pal, Y. (2020). A novel solar‐powered master‐slave electric motor‐based energy‐saving and cooling approach for the motors of conveyor system. International Transactions on Electrical Energy Systems, 30(10), e12563.
Glock, C. H., Grosse, E. H., Neumann, W. P., & Feldman, A. (2021). Assistive devices for manual materials handling in warehouses: a systematic literature review. International Journal of Production Research, 59(11), 3446-3469.
Guo, S., Huang, W., & Li, X. (2020). Normal force and sag resistance of pipe conveyor. Chinese Journal of Mechanical Engineering, 33(1), 48.
LaRose, J. A., Tamez, D., Ashenuga, M., & Reyes, C. (2024). Design concepts and principle of operation of the HeartWare ventricular assist system. In American Society for Artificial Internal Organs (ASAIO) Platinum 70th Anniversary Special Edition (pp. 226-230). CRC Press.
Krawiec, P., Warguła, Ł., Waluś, K. J., Gawrońska, E., Ságová, Z., & Matijošius, J. (2022). Efficiency and slippage in draw gears with flat belts. Energies, 15(23), 9184.
Lee, S. M., Lee, D., & Kim, Y. S. (2019). The quality management ecosystem for predictive maintenance in the Industry 4.0 era. International Journal of Quality Innovation, 5(1), 4.
Mendes, D., Gaspar, P. D., Charrua-Santos, F., & Navas, H. (2023). Integrating TPM and Industry 4.0 to increase the availability of industrial assets: A case study on a conveyor belt. Processes, 11(7), 1956.
Mukherjee, S. (2018). Challenges to Indian micro small scale and medium enterprises in the era of globalization. Journal of Global Entrepreneurship Research, 8(1), 28.
Nielsen, S. S., Holm, R. K., & Rasmussen, P. O. (2020). Conveyor system with a highly integrated permanent magnet gear and motor. IEEE Transactions on Industry Applications, 56(3), 2550-2559.
Priyambudi, A., & Basri, M. H. (2023). Optimizing Overall Equipment Effectiveness Using Kepner-Tregoe Decision Analysis: A Case Study of Semi-lean Pumps in Ammonia Plant 2 of PT Pupuk Kalimantan Timur. European Journal of Business and Management Research, 8(6), 49-58.
Shang, M., Zhang, Z., Yin, C., & Li, K. (2024). The development of the fuel saving control strategy for 48 V P0 system: Design and experimental investigation. Advances in Mechanical Engineering, 16(1), 16878132231222067.
Solomashenko, A. B., Afanaseva, O. L., Shishova, M. V., Gulianskii, I. E., Sobolnikov, S. A., & Petrov, N. V. (2025). Industrial applications of AR headsets: a review of the devices and experience. Light: Advanced Manufacturing, 6, 1-30.
Oztemel, E., & Gursev, S. (2020). Literature review of Industry 4.0 and related technologies. Journal of intelligent manufacturing, 31(1), 127-182.
Zhang, M., Zhang, N., Guan, D., Ye, P., Song, K., Pan, X., ... & Cheng, M. (2020). Optimal design and operation of regional multi-energy systems with high renewable penetration considering reliability constraints. IEEE Access, 8, 205307-205315.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Global Education Journal
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
